Heated Sample Line

$1,019.00
SKU:
072310_
Heated Sample Lines CleanAir Express heated sample lines feature an electrically heat traced and insulated 3/8" Teflon ® PTFE (.030 Wall) sample line with a stainless steel over braid and stainl… Read more
Basic Overview

Description

Heated Sample Lines

Heated Sample Line with Temperature ControllerCleanAir Express heated sample lines feature an electrically heat traced and insulated 3/8" Teflon ® PTFE (.030 Wall) sample line with a stainless steel over braid and stainless steel tube ends, a 1/4 Teflon ® PTFE (.040 wall) calibration line, 3 pin Amphenol power connector, and 2 type K thermocouple plugs. Protected by a durable scuff resistant extruded polyurethane jacket. *Temperature controller sold separately. *Heated Sample Lines are not self limiting; a temperature controller is required. Custom lengths, voltage, and configuration available*Heavy Duty Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at -20°F ambient temperature.

Part Number
Voltage
Watts
Length FT
Amp.
0723-10
120
300
10' Heated Sample Line
2.73
0723-25
120
750
25' Heated Sample Line
6.82
0723-50
120
1500
50' Heated Sample Line
13.64
0723-100
120
2500
100' Heated Sample Line
22.73
*0723-100HD
120
3000
100' Heavy Duty Heated Sample Line
27
0723-100220
120/240
N/A
100' Dual Voltage Heated Sample Line
N/A
Universal Temperature Controller

Heated Sample Lines are used with:

Heavy Duty versus Standard Heated Sample Line

      • Note: Heavy Duty Heated Sample Lines HD are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of -20°F.
      • Note: Standard Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of 0°F.

Heated Sample Line Features:

  • Rated for 400 º F continuous operation at -20 º F ambient temperature
  • Triple insulation maintains temperature of line with less power consumption. (Heavy Duty)
  • Lower resistance heaters requires less power to heat lines.
  • A backup type K thermocouple to prevent project delays in the case of primary thermocouple failure in the field.
  • Stainless steel over braid and stainless steel tube ends for the sample line to prevent abrasive failure in the field. Optional stainless steel over braid for protection of calibration line from abrasive failure in the field.
  • Durable extruded poly-urethane jacket for protection of sample/calibration lines from abrasive failure in the field.
  • Inert Teflon® PTFE sample and calibration lines provide more accurate results by eliminating potential bias from other materials. PTFE is also more corrosion resistant than tygon, and can be washed with acetone without degradation.