Heated Sample Lines Rental with Temperature Controller

Heated Sample Line Rental CleanAir Instrument Rental heated sample lines feature an electrically heat traced and insulated 3/8" Teflon ® PTFE (.030 Wall) sample line with a stainless steel over braid and stainless steel tube ends, a 1/4 Teflon ® PTFE (.040 wall) calibration line, 3 pin Amphenol power connector, and 2 type K thermocouple plugs. Protected by a durable scuff resistant extruded polyurethane jacket. *Temperature controller sold separately. *Heated Sample Lines are not self limiting; a temperature controller is required. Custom lengths, voltage, and configuration available*Heavy Duty Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at -20°F ambient temperature.

Rentals orders come with a Temperarture Controller. New or Used Heated Sample Lines require an additional purchase. Temperature controllers are available here.

Part Number	Voltage	Watts	Length FT	Amp.
0723-10R	120	300	10' Heated Sample Line	2.73
0723-25R	120	750	25' Heated Sample Line	6.82
0723-50R	120	1500	50' Heated Sample Line	13.64
0723-100R	120	2500	100' Heated Sample Line	22.73
Heated Sample Lines are used with: CEM Cateco - 0035RNT CEM 3 Point Probe - 0723123 Temperature Controllers Heavy Duty versus Standard Heated Sample Line Note: Heavy Duty Heated Sample Lines HD are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of -20°F. Note: Standard Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of 0°F. Heated Sample Line Features: Rated for 400 º F continuous operation at -20 º F ambient temperature Triple insulation maintains temperature of line with less power consumption. (Heavy Duty) Lower resistance heaters requires less power to heat lines. A backup type K thermocouple to prevent project delays in the case of primary thermocouple failure in the field. Stainless steel over braid and stainless steel tube ends for the sample line to prevent abrasive failure in the field. Optional stainless steel over braid for protection of calibration line from abrasive failure in the field. Durable extruded poly-urethane jacket for protection of sample/calibration lines from abrasive failure in the field. Inert Teflon® PTFE sample and calibration lines provide more accurate results by eliminating potential bias from other materials. PTFE is also more corrosion resistant than tygon, and can be washed with acetone without degradation.