5 Channel Calibrator

$1,854.00
SKU:
0724
5 Channel Calibrator The 5 Channel Calibrator is designed to interface CEM analyzers with five individual calibration gasses. The gasses can be controlled manually or remotely to flow thro… Read more
Basic Overview

Description

5 Channel Calibrator

5 Channel Calibrator
The 5 Channel Calibrator is designed to interface CEM analyzers with five individual calibration gasses. The gasses can be controlled manually or remotely to flow through one of two calibration ports. Sub-Rack designed for installation into a standard 19" instrument rack. Flow-meter with stainless steel needle valve provides indication and control of calibration gas flow rate from 1 to 10 lpm. Auto Mode allows a data acquisition system equipped with a dry contact closure to control the calibration points remotely. A 12VDC output signal is provided for use by the control system via an Amphenol connector located on the rear of the 5 Channel Calibrator.
Part Number
Items
0724 120 Vac 5 Channel Calibrator
0724J
5 Channel Calibrator Jumper for Auto Mode

5 Channel Calibrator Features/Specifications:

  • Flow meter with stainless steel needle valve provides indication and control of calibration gas flow rate from 1 to 10 lpm.
  • AUTO Mode allows a data acquisition system equipped with a dry contact closure to control the calibration points remotely.
  • A 12 VDC output signal is provided for use by the control system via an Amphenol connector located on the rear of the calibrator.
  • Sub-Rack Design for installation into a standard 19" instrument rack.
  • Weight: 7Lbs
  • Dimensions: 5.5" x 5" x 12"
  • Power: 120 VAC
  • Fittings: 1/4" Compression Fittings
  • Amphenol: 7 Pin Connection
  • Pressure Range: Operating 25 psig Max 40 Psig
  • Temperature Range: Ambient (Non-Condensing)
  • Gas Inputs: 5 Calibration Gas Inputs
  • Gas Outputs: 2 Calibration Gas Outputs