Web Analytics

CleanAir Sample Gas Distribution Module

CleanAir Sample Gas Distribution Module

$2,835.00

The CleanAir Sample Gas Distribution Module is designed to interface CEM analyzers with four individual sample gas streams. A back pressure regulator controls the sample pressure to provide a steady flow rate to the analyzers. In calibration mode the sample gas is bypassed to the vent and a calibration gas port is routed to the analyzers for internal calibration. The calibration mode can be controlled manually by a front panel push button or remotely from your data acquisition system. A disposable sample inlet filter is mounted on the back panel for easy access. The Sample Gas Distribution Module combined with a Calibration Module can make controlling sample and calibration gases to your analyzers simple and easy.

SKU:
9742

The CleanAir Sample Gas Distribution Module is designed to interface CEM analyzers with four individual sample gas streams. A back pressure regulator controls the sample pressure to provide a steady flow rate to the analyzers. In calibration mode the sample gas is bypassed to the vent and a calibration gas port is routed to the analyzers for internal calibration. The calibration mode can be controlled manually by a front panel push button or remotely from your data acquisition system. A disposable sample inlet filter is mounted on the back panel for easy access. The Sample Gas Distribution Module combined with a Calibration Module can make controlling sample and calibration gases to your analyzers simple and easy.

Part Number
Items
 9742
120 Vac Sample Gas Distribution Module
9742J
Sample Gas Distribution Module Jumper

Features

  • Flowmeters: with stainless steel needle valve provides indication and control of sample gas flow rate from 0 to 1.0 lpm. and a 0-10 lpm. flow meter for sample vent flow.
  • Back Pressure Regulator: provides consistent sample flow rates.
  • Sample Inlet Filter: mounted on back panel for easy access.
  • CAL Mode: allows a data acquisition system equipped with a dry contact closure to control the calibration port remotely. A status output is also provided when in manual cal mode.
  • Sub-Rack Design: for installation into a standard 19″ instrument rack.

No additional documents available for this product

CleanAir Engineering provides world-class service, support, and technical expertise alongside every instrument rental. All air monitoring equipment is inspected or calibrated before shipping from one of our four technical centers. Each rental includes additional accessories and components, providing added convenience and reliability to ensure the success of your project. Contact us for more information.