Loading... Please wait...
USA: 800-223-3977

Currency Displayed in


Sample Gas Distribution Module

Hover over image to zoom

  • 9742- Sample Gas Distribution Module
  • 9742J- Sample Gas Distribution Module Jumper
Usually ships in 24 hours.
Request Quote

 Product Description

Sample Gas Distribution Module

Sample Gas Distribution Module

The Sample Gas Distribution Module is designed to interface CEM analyzers with four individual sample gas streams. A back pressure regulator controls the sample pressure to provide a steady flow rate to the analyzers. In calibration mode the sample gas is bypassed to the vent and a calibration gas port is routed to the analyzers for internal calibration. The calibration mode can be controlled manually by a front panel push button or remotely from your data acquisition system. A disposable sample inlet filter is mounted on the back panel for easy access. The Sample Gas Distribution Module combined with a Calibration Module can make controlling sample and calibration gases to your analyzers simple and easy.
Flowmeters: with stainless steel needle valve provides indication and control of sample gas flow rate from 0 to 1.0 lpm. and a 0-10 lpm. flow meter for sample vent flow.
Back Pressure Regulator: provides consistent sample flow rates.
Sample Inlet Filter: mounted on back panel for easy access.
CAL Mode: allows a data acquisition system equipped with a dry contact closure to
control the calibration port remotely. A status output is also provided when in manual cal mode.
Sub-Rack Design: for installation into a standard 19" instrument rack.
Part Number
This item may also be rented through CleanAir Rentals

 Find Similar Products by Category

You Recently Viewed...


What's News


Ship Direct

Copyright 2019 CleanAir® Engineering Online Store. All Rights Reserved.
 Sitemap | USA 800-223-3977 Fax: 847-991-8924